 |
 |
|
|
|
|
Liquid
Carbon Dioxide (CO2)
|
|
| Model: | 3TCO2 | 6TCO2 | 8TCO2 | 10TCO2 | 14TCO2 | 20TCO2 | 24TCO2 | 30TCO2 | 50TCO2 |
| Water
volume @ 100 % Gall (Lt): |
872 |
1461 (5531) |
2044 (7738) |
2631 (9962) |
3425 (12965) |
5349 (20245) |
6574 (24883) |
7541 (28543) |
12383 (46871) |
| Cold
Volume @ 90%Gall (Lt): |
@ 90% |
@ 90%
1315 (4978) |
@ 92%
1880 (7119) |
@ 92%
2412 (9165) |
@ 95%
3254 (12316) |
@ 95%
5081 (19233) |
@ 95%
6245 (23639) |
@ 95% 7164 (27116) |
@ 95%
11764 (44528 |
| Product
Weight Lb (Kg): |
6646 |
11139 (5053) |
16109 (7307) |
20508 (9302) |
27560 (12501) |
43036 (19521) |
52896 (23993) |
60675 (27522) |
99638 (45195) |
| MAWP Psig (Kg/cm2): | 350 (24.6) |
350 (24.6) |
350 (24.6) |
350 (24.6) |
350 (24.6) |
350 (24.6) |
350 (24.6) |
350 (24.6) |
350 (24.6) |
| Product: | CO2 | CO2 | CO2 | CO2 | CO2 | CO2 | CO2 | CO2 | CO2 |
| Empty
Weight Lb (Kg): |
7492 (3398) |
10186 (4620) |
11685 (5300) |
14275 (6475) |
25022 (11350) |
33069 (15000) |
39683 (18000) |
45561 (20666) |
65590 (29751) |
| Maximum
Width in (m): |
82.75 (2.10) |
82.75 (2.10) |
82.75 (2.10) |
82.75 (2.10) |
96 (2.43) |
96 (2.43) |
96 (2.43) |
96 (2.43) |
116 (2.94) |
| Height: in (m): | 130.25 (3.3) |
178.25 (4.5) |
226.25 (5.7) |
274.25 (6.9) |
211 (5.35) |
271 (6.9) |
346 (8.8) |
391 (9.93) |
434.6 (11.03) |
| Evaporation
rate (Less than %): |
0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
| Flow Diagram: | 1-CO2-0336 | 1-CO2- 0336 |
1-CO2-0336 | 1-CO2- 0336 |
1-CO2- 0336 |
1-CO2- 0336 |
1-CO2- 0336 |
1-CO2- 0336 |
1-CO2- 0336 |
| Refrigeration Unit: (Optional) | 1 HP | 1 HP | 1 HP | 1 HP | 2 HP | 2 HP | 2 HP | 2 HP | 3HP |
| Desing & Manufacturing codes: |
| ASME Section VIII Division 1, Last Edition, Last Addenda Stamped "U-1" |
| Inner vessel: CGA-341
Last Edition Materials: |
| Materials: | |
| 1. INNER VESSEL: | SA-612N Carbon SteelModel:3 TCO2 to 6 TCO2 Ellipsoidal Heads SA-612N8 TCO2 to 50 TCO2 Hemispherical heads SA-612NRT-2 Spots Radiographic Stamped ASME |
| 2. MANWAY | SA-516-70 / SA-106-B16" Diameter, With external access |
| 3. INNER PIPING: | SA-312-304 Stainless Steel |
| 4. INSULATION: | Perlite / Full vacuum |
| 5. INTERNAL SUPPORTS: | SA-240-304 Stainless Steel |
| 6. OUTER JACKET: | SA-36 / SA-285-C Carbon Steel |
| 7. OUTER JACKET PADS: | SA-36 CS / SA-240-304 SS |
| 8. LIFTING LUGS | SA-36 (The unit shall be lifted empty) |
| 9. NAMES PLATES | ASME nameplate "original" welding attached inner vessel ASME nameplate "Duplicate" attached to outer jacket |
| 10. EXTERNAL PIPING | *Ball Valves (Brass)*Piping Material: Stainless Steel 304.*CGA Connection for CO2 service*Aluminum Identification plates for valves.*Safety system: 2 Safety Valves set at MAWP |
| 11. REFRIGERATION UNIT: (OPTIONAL) | (1 HP) Copeland FJAL-A101-CAV-011 (18.375" x 24") Compressor: Copeland RS80CIE-CAV-101(2 HP) Copeland FJAL-A200-CFV-001Compresor: Copeland CS14KGE-PFV-273For 1 & 2 HP low pressure 174 psig / high pressure 500 psig/208-230 VAC. |
| 11. PRESSURE BUILD COIL (OPTIONAL) | Material: SB-221-6063-T5 /MAWP: 350 psig |
| 12. PAINTING: | Primer: 25P Dupont, 3 Mils DFT gray Finishing: Imron 326 Dupont white color standard, 3 Mils DFT. |
| 13. TESTING STANDARD: | · Inner vessel pressure test according to ASME code.· Inner & Outer jacket helium leak test.· Warm vacuum retention test, 72 Hrs.· Ner test of 1st unit of every series· Cold Shock test.· Operation test |
| LOX/ LIN/ LAR Customer Stations | Large LOX/ LIN/ LAR Tanks | Liquid CO2 Tanks |
| Vaporizers | Pressure Vessels | Cryogenic Trailers |
| LNG and Ethylene Tanks | Used Tanks | Used Trailers |
Universal Industrial Gases, Inc.
2200 Northwood Ave. Suite 3
Easton, Pennsylvania 18045-2239 USA
Phone (610) 559-7967 Fax (610) 515-0945
All material contained herein Copyright 2003 / 2009 UIG.
Mobile Games |
aviation |
aviation |
search for |
video |
culture |
Second-hand housing |
Real estate |
city |